Application
Our roof panel roll forming machine produces different kinds of steel panel tiles for roofs and walls. The roll formed tiles are primarily used for temporary building sites, steel structure workshops, and other public buildings and feature fast construction speed. Our tiles are durable, have an attractive appearance, etc.
Main Equipment
Our roof panel forming machine consists of a manual decoiler, feeding platform, main molding core, shearing machine, hydraulic station, computer control cabinet, high precision counter, and driven system protective covering panel supporting table.
Technical parameters of Roof Panel Roll Forming Machine
| NO | Model | Coil Width (mm) | Effective Width (mm) | Profile Drawing |
| 1 | 29-180-720 | 1000 | 720 |  |
| 2 | 35-125-750 | 1000 | 750 |  |
| 3 | 22-215-860 | 1000 | 860 |  |
| 4 | 3/4''-9''-36'' | 40.875 '' | 36'' |  |
| 5 | 24-83-913 | 1250 | 913 |  |
| 6 | 22-215-1075 | 1250 | 1075 |  |
| 7 | 32-196-980 | 1220 | 980 |  |
| 8 | 28-200-1000 | 1200 | 1000 |  |
| 9 | 44-150-900 | 1250 | 900 |  |
Technical Specifications of Roof Panel Roll Forming Machine
| Item | Description |
| Material Width | 1000mm |
| Material Thickness | 0.5mm-1mm |
| Material | PPGI GI |
| Yield Stress | 235Mpa |
| Material of Roller | 45# steel plated hard chromium 0.05mm |
| Diameter of Shaft | 70mm |
| Voltage | AC380v/50hz or per customer's requirement |
| Motor Power | 7.5kw |
| Hydraulic Power | 4kw |
| Stand | 18 |
| Control System | Mitsubishi PLC frequency conversion |
| Hydraulic Cutting Material | Cr12 heat treatment |
| Speed | 8-15m/min |
| Decoiler | 5 tons manual or hydraulic |
Technical Specifications of Roof Panel Roll Forming Machine
| Item | Description |
| Material Width | 1250mm |
| Material Thickness | 0.5mm-1mm |
| Material | PPGI GI |
| Yield Stress | 235Mpa |
| Material of Roller | 45# steel plated hard chromium 0.05mm |
| Diameter of Shaft | 70mm |
| Voltage | AC380v/50hz or per customer's requirement |
| Motor Power | 5.5kw |
| Hydraulic Power | 4kw |
| Stand | 18 |
| Control System | Mitsubishi PLC frequency conversion |
| Hydraulic Cutting Material | Cr12 heat treatment |
| Speed | 8-15m/min |
| Decoiler | 5 tons manual or hydraulic |
Features
This type of roof panel forming machine features high speed, high production, good performance, low labor and is economical. This roll former is the best choice for producing metal sheet cold roll formed products.
Flow chart
Decoiling the sheet---Guiding the sheet---Leveling the sheet---Roll forming---Punching the sheet---Measuring the length---Cutting the sheet---on the output table
Machine Placement and Operator
The roof panel roll forming machine should be placed on an even cement floor and lifted with a lifting device with a lifting capacity not less than five tons. The machine requires space for storing materials, laying the machine and enough room for it to operate. The roof panel roll former requires one operator and one porter. The temperature in the workspace should be no less than -14℃.
As an experienced roof panel forming machine manufacturer based in China, We produces an extensive line of forming equipment, such as curved roofing sheet roll forming machines, roll forming machines, metal sheet forming machines, and so on. We can manufacture our forming machine according to customers' specific requirements. As a result of our high quality products and dependable service, we have been awarded the ISO9001 certificate.
